A/C GUARD 16A, 20A, 25A AVS with Over-Current Protection:
Single phase
1. The A/C Guard protects against low voltage, high voltage and power-back surges by disconnecting the power to the equipment. It features a start up delay of about 4 minutes to prevent frequent switching on and off during fluctuations.
2. The A/C Guard has a built-in micropro cessor which adds the advanced feature TimeSave. When the mains returns to normal, the A/C Guard checks the duration of the OFF time. If the unit has been off for more than 4 minutes then it will reconnect the mains within 10 seconds, rather than the standard 4 minutes.
Circuit breaker function
An integral circuit breaker enhances the protection offered by the A/C Guard. If a short circuit or overload occurs, the circuit breaker detects the fault and the air conditioner is safely disconnected.
To resume operation, simply switch the power on again manually after removing the fault.
| Nominal Voltage |
230V |
| Current Rating |
16, 20, or 25Amps |
| Frequency |
50/60Hz |
| Under/over-Voltage Disconnect |
185V/260V |
| Under/over-Voltage Reconnect |
190V/258V |
| Spike Protection |
160J |
| Wait Time |
4 minutes |
| Weight |
150g |
| Measurement |
47× 36.5× 40 |
| PCS/CTN |
50 |
Audited Supplier 
){kind=link}
){kind=link}